Filter
Top Products
3-13
DD
Drive gain adjustment
The drive gain is active for all modes other than SSB
mode with speech compressor OFF. The [DRIVE] con-
trol adjusts the amplifying gain at the driver stage.
Before transmitting, monitor your selected operating
frequency to make sure transmitting won’t cause inter-
ference to other stations on the same frequency.
qPush [METER]
(MF2) to select the ALC meter.
wPush [PTT] (microphone; SSB with [COMP] ON, AM
or FM), key down (CW) or push (RTTY
or PSK) to transmit.
eWhile talking into the microphone, keying down or
transmitting, rotate [DRIVE] so that the ALC meter
reading is between 30 to 50% of the ALC scale. (see
left)
•Talk into the microphone at your normal voice level.
rRelease [PTT], stop keying or push
again to return to receive.
TRANSMIT
TRANSMIT
3
BASIC OPERATIONS
S
1
0
0
0
1
2
5
10
10
10
20
44
52V
50 100
150
200
250
15
3
1.5
ID
VD
dB
W
A
Po
SWR
COMP
ALC
5
9
+
20
+
40
+
60dB
∞
Drive gain range
[DRIVE]
METER