Filter
Top Products
16-4
■ Firmware update— USB-Memory
When updating the firmware with the USB-Memory, no
IP address or subnet mask settings are necessary.
q Copy the downloaded firmware data into the USB-
Memory (“IC-7700” folder).
• The USB-Memory must have been formatted by the IC-
7700.
w Insert the USB-Memory into the USB connector.
e Push several times to close a multi-func-
tion screen, if necessary.
r Push [F-7•SET] to select set mode menu screen.
t Push [F-7•USB] to select USB-Memory set menu.
y Push and hold [F-3•FIRM UP] for 1 sec.
u Read the displayed precaution carefully.
• Push [F-1•Y] or [F-2•Z] to scroll the indication.
•Push [F-7•CANCEL] to cancel the firmware updating.
i After you read and understand all of the precau-
tions, push [F-6•OK].
• [F-6•OK] appears only following the precautions.
•Push [F-7•CANCEL] to cancel the firmware updating.
o Push [F-2•Y] or [F-3•Z] to select the firmware file,
then push [F-4•FIRM UP].
!0 Read the displayed precautions carefully.
!1 If you agree, push and hold [F-6•OK] for 1 sec. to
start the firmware update.
•Push [F-7•CANCEL] to cancel the firmware updating.
!2 While loading the firmware from the USB-Memory,
the dialog as at left is displayed.
EXIT/SET
/
∫
DIR/FILE
F-1
F-7
USB CANCELFIRM UP
FIRM UP
F-6
OK
F-3
F-4
/
SET
//
/
F-2
√ ∫
√
EXIT/SET
16
UPDATING THE FIRMWARE