Icom IC-7700 Stereo Amplifier User Manual


 
14-6
DD
Command table (continued)
14
CONTROL COMMAND
1A 050077 Send/read RTTY keying polarity
(0=Normal, 1=Reverse)
050078 Send/read PSK tone frequency
(0=1000 Hz, 1=1500 Hz,
2=2000 Hz)
050079 Send/read speech language
(0=English, 1=Japanese)
050080 Send/read speech speed
(0=Slow, 1=Fast)
050081 Send/read S-level speech
(0=OFF, 1=ON)
050082 Send/read speech with a mode
switch operation (0=OFF, 1=ON)
050083 Send/read memo pad numbers
(0=5 ch, 1=10 ch)
050084 Send/read main dial auto TS
(0=OFF, 1=Low, 2=High)
050085 Send/read mic. up/down speed
(0=Low, 1=High)
050086 Send/read quick RIT/TX clear
function (0=OFF, 1=ON)
050087 Send/read SSB notch operation
(0=Auto, 1=Manual,
2=Auto/Manual)
050088 Send/read AM notch operation
(0=Auto, 1=Manual,
2=Auto/Manual)
050089 Send/read DIGI-SEL control func-
tion (0=DIGI-SEL, 1=APF)
050090 Send/read SSB/CW synchronous
tuning function (0=OFF, 1=ON)
050091 Send/read CW normal side set
(0=LSB, 1=USB)
050192 Set/read APF type
(0=SHARP, 1=SOFT)
050093 Send/read external keypad set
for voice memory (0=OFF, 1=ON)
050094 Send/read external keypad set
for keyer memory (0=OFF, 1=ON)
050095 Send/read CI-V transceive set
(0=OFF, 1=ON)
050096 Send/read RS-232C function
(0=CI-V, 1=Decode)
050097 Send/read RS-232C decode
Baud rate (0=300, 1=1200,
2=4800, 3=9600, 4=19200)
050098 Send/read keyboard type
(00=English, 01=Japanese,
02=United Kingdom, 03=French,
04=French (Canadian),
05=German, 06=Portuguese,
07=Portuguese (Brazilian),
08=Spanish, 09=Spanish (Latin
American), 10=Italian)
050099 Send/read keyboard repeat delay
(10=100 msec. to
100=1000 msec.)
050100 Send/read keyboard repeat rate
(0=2.0 cps to 31=30.0 cps)
050101 Send/read IP address set
(0000000000000001=0.0.0.1 to
0255025502550254=255.255.25
5.254)
1A 050102 Send/read subnet mask
(1=128.0.0.0 to
30=255.255.255.252)
050103 Send/read scope indication during
TX (0=OFF, 1=ON)
050104 Send/read scope max. hold
(0=OFF, 1=ON)
050105 Send/read scope center frequen-
cy set (0=Filter center, 1=Carrier
point center, 2=Carrier point cen-
ter (Abs. Freq.))
050106 Send/read waveform color for
receiving signal
(see p. 14-10 for details)
050107 Send/read waveform color for
max. hold
(see p. 14-10 for details)
050108 Send/read scope sweep speed
for ±2.5 kHz span
(0=Slow, 1=Mid., 2=Fast)
050109 Send/read scope sweep speed
for ±5 kHz span
(0=Slow, 1=Mid., 2=Fast)
050110 Send/read scope sweep speed
for ±10 kHz span
(0=Slow, 1=Mid., 2=Fast)
050111 Send/read scope sweep speed
for ±25 kHz span
(0=Slow, 1=Mid., 2=Fast)
050112 Send/read scope sweep speed
for ±50 kHz span
(0=Slow, 1=Mid., 2=Fast)
050113 Send/read scope sweep speed
for ±100 kHz span
(0=Slow, 1=Mid., 2=Fast)
050114 Send/read scope sweep speed
for ±250 kHz span
(0=Slow, 1=Mid., 2=Fast)
050115 Send/read scope edge frequen-
cies for 0.03 to 1.60 MHz band
(see p. 14-10 for details)
050116 Send/read scope edge frequen-
cies for 1.60 to 2.00 MHz band
(see p. 14-10 for details)
050117 Send/read scope edge frequen-
cies for 2.00 to 6.00 MHz band
(see p. 14-10 for details)
050118 Send/read scope edge frequen-
cies for 6.00 to 8.00 MHz band
(see p. 14-10 for details)
050119 Send/read scope edge frequen-
cies for 8.00 to 11.00 MHz band
(see p. 14-10 for details)
050120 Send/read scope edge frequen-
cies for 11.00 to 15.00 MHz band
(see p. 14-10 for details)
050121 Send/read scope edge frequen-
cies for 15.00 to 20.00 MHz band
(see p. 14-10 for details)
050122 Send/read scope edge frequen-
cies for 20.00 to 22.00 MHz band
(see p. 14-10 for details)
050123 Send/read scope edge frequen-
cies for 22.00 to 26.00 MHz band
(see p. 14-10 for details)
Command Sub command Description Command Sub command Description