Filter
Top Products
10-4
■ Antenna memory settings (continued)
DD
Temporary memory
The antenna temporary memory memorizes the man-
ually selected antenna. The selected antenna will be
re-called even if frequency band has been changed.
q Select the antenna set screen.
wPush [F-4•TEMP-M] to turn the temporary memory
ON and OFF.
eSelect the desired frequency band with a band key.
rPush [ANT]
(MF1) to select the desired antenna.
•“★” appears when a different antenna from the original is
selected.
tPush [F-1•ANT MR] to re-call the original antenna.
•“★” disappears.
yPush to exit antenna set screen.
CAUTION!: Before transmitting with the manually
selected antenna, make sure the selected antenna
suits the operating frequency. Otherwise the trans-
ceiver may be damaged.
DD
Antenna selection mode
The automatic antenna selection (antenna memory)
and the [ANT] (MF1) switch function can be deactivated
if desired.
q Select the antenna set screen.
wPush [F-6•[ANT] SW] to select the antenna selec-
tion from Auto, OFF and Manual.
• Auto : Use the antenna memory. Antenna selec-
tion with [ANT] switch is also available.
• OFF : Only the antenna connected to [ANT1]
can be used. [ANT] switch is deactivated.
• Manual: Deactivate the antenna memory function.
Antenna can be selected with [ANT]
switch operation only.
ePush to exit antenna set screen.
EXIT/SET
EXIT/SET
Push to select the
antenna selection mode.
F-6
[ANT] SW
“★” indicators appear when a different
antenna from the original is selected.
Push [F-4•TEMP-M] to turn the
temporary memory ON and OFF.
10
ANTENNA TUNER OPERATION