Filter
Top Products
8-2
■ Memory channels
The transceiver has 101 memory channels. Memory
mode is very useful for quickly changing to often-used
frequencies.
All 101 memory channels are tunable which means the
programmed frequency can be tuned temporarily with
the main dial, etc. in memory mode.
■ Memory channel selection
DD
Using the / keys
qPush to select memory mode.
wPush / several times to select the de-
sired memory channel.
• Push and hold / for continuous selection.
•[UP] and [DN] on the microphone can also be used.
eTo return to VFO mode, push again.
DD
Using the keypad
qPush to select memory mode.
wPush .
ePush the desired memory channel number using the
keypad.
• Enter 100 or 101 to select scan edge channel P1 or P2,
respectively.
rPush or to select the desired memory
channel.
[EXAMPLE]
To select the memory channel 3;
- Push , , then push or .
To select the memory channel 12;
- Push , , , then push or
.
To select the scan edge channel P1;
- Push , , , , then push
or .
To select the scan edge channel P2;
- Push , , , , then push
or .
√
∫
1.8
1
50
0
1.8
1
F-INP
ENT
√
∫
50
0
50
0
1.8
1
F-INP
ENT
√
∫
3.5
2
1.8
1
F-INP
ENT
√
∫
7
3
F-INP
ENT
√
∫
F-INP
ENT
V/M
V/M
√
∫
√
∫
V/M
√
∫
V/M
Y Z
Keypad
F-IMP
ENT
V/M
Y Z
8
MEMORY OPERATION
MEMORY
MEMORY
TRANSFER OVER-
CHANNEL
CHANNEL CAPABILITY
TO VFO WRITING
CLEAR
NUMBER
Regular memory
1–99
One frequency and one mode
Yes Yes Yes
channels in each memory channel.
Scan edge
One frequency and one mode in
memory P1, P2 each memory channel as scan Yes Yes No
channels edges for programmed scan.