Filter
Top Products
9-6
■ Memory scan operation
qPush several times to close a multi-func-
tion screen, if necessary.
wSelect memory mode.
ePush [F-5•SCAN] to select the scan screen.
rSet [SQL] open or closed.
• See page 9-2 for squelch condition.
tPush [F-1•MEMO] to start the memory scan.
•“ ” and decimal points blink while scan-
ning.
yWhen the scan detects a signal, the scan stops,
pauses or ignores it depending on the resume set-
ting and the squelch condition.
uTo cancel the scan, push [F-1•MEMO].
• Rotating the main dial also cancels the scan.
2 or more memory channels must be programmed
for memory scan to start.
■ Select memory scan operation
qPush several times to close a multi-func-
tion screen, if necessary.
wSelect memory mode.
ePush [F-5•SCAN] to select the scan screen.
rSet [SQL] open or closed.
• See page 9-2 for squelch condition.
tPush [F-5•SEL No.] several times to select the se-
lect scan number from ★1, ★2, ★3 and ★1/★2/★3.
yPush [F-1•MEMO] to start the memory scan.
•“ ” and decimal points blink while scan-
ning.
uPush [F-3•SELECT] to start select memory scan;
push [F-3•SELECT] again to return to memory scan,
if desired.
•“ ” blinks instead of
“” during select memory scan.
iWhen the scan detects a signal, the scan stops,
pauses or ignores it depending on the resume set-
ting and the squelch condition.
oTo cancel the scan, push [F-1•MEMO].
• Rotating the main dial also cancels the scan.
2 or more memory channels must be designated as
select memory channels, as well as the same select
scan channel number, for select memory scan to
start.
MEMORY SCAN
SELECT MEMORY SCAN
MEMORY SCAN
EXIT/SET
MEMORY SCAN
EXIT/SET
[SQL]
Main dial
EXIT/SET
F-1
MEMO
F-3
SELECT
F-5
SEL No.
[SQL]
Main dial
EXIT/SET
F-1
MEMO
9
SCANS