Filter
Top Products
12-2
■ Set mode description
Set mode is used for programming infrequently
changed values or conditions of functions. The IC-
7700 has a level set mode, display set mode, time set
mode, accessory set mode, Others set mode and
USB-Memory set menu.
DD
Set mode operation
q Push several times to close a multi-func-
tion screen, if necessary.
w Push [F-7•SET] to select set mode menu screen.
• Pushing and holding for 1 sec. also selects set
mode menu screen.
e Push [F-1•LEVEL], [F-2•ACC], [F-3•DISP],
[F-4•TIME], [F-5•OTHERS] or [F-7•USB] to enter
the desired set mode.
r For level, accessory, display and Others set mode,
push [F-7•WIDE] to toggle wide and normal screen.
t Push [F-1•Y] or [F-2•Z] to select the desired item,
then rotate the main dial to adjust/select the desired
value or condition.
• Pushing [F-3•Ω≈] operation may be necessary for
some items.
y Push twice to exit set mode.
EXIT/SET
EXIT/SET
EXIT/SET
Main dial
F-1
LEVEL
F-2
ACC
F-5
OTHERS
EXIT/SET
F-3
DISP
F-4
TIME
F-7
USB
12
SET MODE