Control Panel Operation
CP 3809
6−125CM 4000 Installation and Operating Manual
Deleting an Output on TAKE Key
To delete an output that has been dynamically assigned to the expansion panel, use the CP 3808/3830 to select an output that
is not defined and press the appropriate button on the expansion panel.
Permanent Assignment of Outputs to the Expansion Panel
Outputs can also be assigned permanently, using the CP Output Set. See page 5−79.
Since there are no output displays, Grass Valley recommends fixing these outputs in the CP Output Set and installing perma-
nent labels in the buttons.
Diagnostics Mode
On the CP 3809, diagnostics mode is entered by pressing and holding the first button while pressing the eighth button.
For a description of the diagnostics and adjustments, please see the CP 3830 Diagnostic Mode on page 6−87, starting with
Step 2. Except as noted, this description applies to the CP 3809.
