A SERVICE OF

logo

Open as PDF
next previous
Configurator
Passwords
5−26 CM 4000 Installation and Operating Manual
5. Use TAB (or click) to select the Level field. Type in the revised password level (if any). This must be a number from
00 to 99.
In this example, pressing Enter at this point will create a row for another password. (If left blank, the new row will be
deleted automatically when the table is saved.)
6. When editing is complete, select “OK.” To save the changes, select “File > Save.”
SETTING PASSWORD LEVELS FOR CONTROL PANELS
Please see page 5−113.
SETTING PASSWORD LEVELS FOR SWITCHER OUTPUTS
Please see page 5−57.
FORCE UNPROTECT/UNLOCK
Force unprotect/unlock is available as a file server utility (page 11−1) and with the VGA Status Display (page 6−140).