
Configurator
MPK Devices
5−108 CM 4000 Installation and Operating Manual
Important: Row numbers on Jupiter tables are used as the “logical” numbers for devices. Changing the row number of an
existing device (by inserting/deleting a new control panel in the middle of the table, for example) will disrupt control of the
system, requiring controller boards to be memory−cleared and reset (see “Clearing Battery−Protected Memory in Appendix
B). One way to avoid this interruption is to add new devices at the end of tables.
MPK
Devices
This column is used to create a name, up to eight characters in length, for each MPK device in the
system. Machine control panels (such as MC 3000, MC 3010, CP 3000 with “Exp” (expansion), CP 3800, and
CP 3810) listed here will automatically appear as a selection on the Machine Control table (page 5−139).
Type
Device types (shown on a pull down menu) are limited to the following:
CP 300
CP 300/S
CP 310
CP 310/S
CP 320
CP 320/S
CP 328
CP 328/S
CP 330
CP 330/6
CP 330/S
CP 2002B
CP 2002D
CP 3000
CP 3008
†
CP 3020
†
CP 3021
†
CP 3030
†
CP 3310/5
†
CP 3310/8
†
CP 3320
†
CP 3300/X
†
CP 3800
CP 3808
CP 3809
CP 3810 (p. 5−131)
CP 3810L (p. 5−131)
CP 3810S
†
CP 3824
CP 3830
CP 3830P
†
CP 3832
CP 3832L
CP 3832P
†
CP 3832S
†
CP 3864
CP 3864L
CP 3864P
†
Diamond (p. 5−123)
ES−LAN
FCS 3276
†
FCS 3277
†
FCS 3296
†
FCS 3360
†
FCS 3363
†
GVG 200
†
JNS−UMD
MANAGER§
MC 3000
MC 3010
MC 3020D
†
MC 3020L
†
MC 3040/2
†
MC 3040/4
†
MC 3040/8
†
MCS TALY
†
MESS UMD
3040 LOCK
†
3040 SLCT
†
MI 3040/T
MI 3040/2
†
MI 3040/4
†
MI 3040/8
†
MI 3040IO
†
SD 3x
†
Serial (p. 5−123)
TSL−UMD
WPE*
UMD3A
VC 3020 (p. 5−114)
VCP 3000
†
(p. 5−114)
VMC 3000
†
(p. 5−114)
Selecting a control panel with an “/S” suffix will cause the panel to operate with “sticky levels.”*
Selecting a CP 3810L device type will cause the panel to operate in single bus mode. For more information,
see page 5−131 and following.
Selecting a CP 3810S device type will cause the panel to operate in “sticky output” mode.
* Defined in Glossary section.
†
Not supported by JupiterXPress application.
§
Custom.