A SERVICE OF

logo

Configurator
MPK Devices
5−122 CM 4000 Installation and Operating Manual
PERMANENT DISPLAY OF MNEMONIC
Front Panel Configuration
Using the front−panel buttons, SlimLine and RP 1/2/3 series UMDs can be configured to display a mnemonic permanently.
For more information, refer to the applicable UMD manual.
Jupiter Configuration
To cause the Jupiter system to display a mnemonic on a permanent basis, the MPK Devices table can be used to assign an
Input Set to the status display containing only one input name and mnemonic. See Figure 5−97.
UMDSD1 4 00000032
NET−INP
NETMON KXYZ−LEVUMD3A
1
MPK Devices
MPK
Expansion
Pass
Board
CM1
Port Address Input Sets Output Sets Level Set Overide Set Sequence Set
Devices word
In Panel Out Panel
Device
Type
Figure 5−97.
1
Input Set — NET−INP
Category
Entry Mnemonic
Logical
2
Net 1 NET NETIN
Auto
Mnem
Input
The Output Set entry is not used in this application; however, the name of an actual Output Set (or Output) must be entered
to satisfy the compiler.
On the Input Set table, the Input field must be the name of an actual input.