3Com CM 4000 Manual

A SERVICE OF

next previous

Configurator

MPK Devices

5−124 CM 4000 Installation and Operating Manual

Notice that device Type “Serial” is used for the “ASCII” protocol connection. For device Type “Serial,” the Input and Output

Sets must be created specifically for use by “serial” devices: the Input Set describes which router inputs can be selected by

the DD (and a number that the DD will use to refer to that input); the Output Set describes which router outputs are wired

to the DD (and a number that the DD will use to refer to that output).

For details concerning CP Input Sets, see page 5−62.

For details concerning CP Output Sets, see page 5−78.

For details concerning CP Level Sets, see page 5−58.