Filter
Top Products
8. Communicator touch panel
8.2 Installing the touch panel interface
Necessary tools
• 17 mm wr ench.
• 10 mm wr ench.
How to install the touch panel interface upon the DP-1500 projector?
1. Assemble the mounting plate and the swivel arm together as illustrated. First the nut (N) upon the rod of the mounting plate, then
the lock washer (L), and then fasten moun ting plate and swivel arm together. When arm is mounted, turn nut (N
) against the arm
to secure the position.
N
L
Image 8-3
2. Slide a washer (M) over the base of the swivel arm and Insert the base of the sw ivel arm into the m ounting hole at the top of the
DP-1500 projector as illustrated.
M
Image 8-4
3. Place the touch panel interface u pon the mounting plate of the swivel arm and fasten the two wing nuts ( W) as illustrated.
W
Image 8-5
4. Connect the circular plug of the multi cable with the circular socket at the rear s ide of the DP-1500 projector.
74
R59770091 DP-1500 06/01/2009