Filter
Top Products
1. Operating conditions
1.3 Heat Dissipation/Cooling
Thermal Management
The projector is fan cooled and must be installed w ith sufficient space m ainly in the front and at the bottom (m inimum 5 cm) and on
the sides to ensure sufficient air flow.
It should b e used in an area where the ambient temperature, as m easured at the projector air inlet, does not exceed +35°C (+95°F).
Besides, the installation of an exh aust s ystem is MANDATORY. T he installed exhaust blower m ust remove an air volume of 6.65 m
3
per min. (235 CFM)
6
R59770091 DP-1500 06/01/2009