Filter
Top Products
1. Operating conditions
1.4 Input Power
Input power requirements
The DP-1500 projector operates from a nominal mono phase power net with a separate earth ground PE. The DP-1500 projector
requires 200–240 VAC, 50–60 Hz, 20 am ps at 200 VAC with a separate earth ground P E. A label on the rear of the projector head
indicates the nominal line voltage for which the projector was set at the factory.
To protect operating personnel, the National Electrical Manufacturers Association (NEMA) recommends that the instrument panel
and cabinet be grounded. In no event shall this projector be operated without an adequate ca binet ground connection.
AC power supply cord specification: Certified cord, 4.0 mm², 10AWG, min. 300V. Installation according to the local e lectrical code
and regulations b y qualified technical personnel only.
R59770091 DP-1500 06/01/2009
7