Filter
Top Products
6. Lamp & lamp house
Image 6-10
3. Install the lamp cathode adaptor (A) up on the xenon bulb lamp (L) as illustrated. Use
torque 2,5 Nm to fasten the fixation screw
(S)oftheadapter. Useforthatatorquewrenchwitha5mmAllensocket. Makesurethatthereisfullcontactbetweenthe
cathode adapter and the lamp base.
Note: The cathode lamp adaptor is delivered in a separate bag with t
he projector. In case of a lamp replacement you have to
reuse the adaptor from the xenon bulb lamp which you want to replace.
S
L
A
2,5 Nm
Image 6-11
4. Install the anode wire lug (L) upon the anode socket (S). Hold fast the nut N1 with an open-end wrench while fastening the nut N2
with a torque of 9Nmusing a torque wrench. Ensure that at both sides of the wire lug L a plane washer (W1 & W2) is present.
Note: The anode socket is locatedjust below the UV blockerand can easily be removed from the lamp house. In case of a lamp
replacement you have to reuse the anode socket which is connected to the xenon bulb lamp which you want to replace.
R59770091 DP-1500 06/01/2009
53