Filter
Top Products
13. Removal and installation of projector covers
13.1 Removal of the lamp cover
WARNING: This procedure may only be performed by qualified technical service personnel.
Necessary tools
7mmflat screw driver.
How to remove the lamp cover of the projector?
1. Release the two captive screws at t he top and bottom right side of the lamp cover, using a fla t screw driver.
Image 13-1
2. Remove the lamp c over from the projector doing the following:
a) gen tly pull out the left bottom corner (A) of the lamp cover,
b) then gently pull out the left top corner (B) of the lamp cover,
c) then move the lamp cover away from the projector (C).
B
A
C
Image 13-2
124 R59770091 DP-1500 06/01/2009