Filter
Top Products
13. Removal and installation of projector covers
13.2 Removal of the input cover
WARNING: This procedure may only be performed by qualified technical service personnel.
Necessary tools
7mmflat screw driver.
How to remove the input cover of the projector?
1. Release the two c aptive screws at the top an d bottom left side of the input cover, using a fla t screw driver.
Image 13-3
2. Remove the input cover from the projector doing the following:
a) gen tly pull out the right bottom corner (A) of the input cover,
b) then gently pull out the right top corner (B ) of the input c over,
c) then move the input cover away from the projector (C).
C
A
B
Image 13-4
R59770091 DP-1500 06/01/2009 125