Filter
Top Products
6. Lamp & lamp house
6.3 Removal of the xenon bulb lamp
WARNING: DO NOT PERMIT UNAUTHORIZED PERSONNEL TO PERFORM OR ATTEMPT ANY PHASE OF
XENON BULB LAMP HANDLING OR SERVICE.
WARNING: This procedure may only be performed by qualified technical service personnel.
CAUTION: Xenon compact arc lamps are highly pressurized. When ignited, the normal operating temperature
of the bulb increases the pressure to a level at which the bulb may explode if not handled in strict accordance
to the manufacturer’s instructions. The bulb is stable at room temperature, but may still explode if dropped
or otherwise mishandled. Whenever the lamp house, containing a xenon bulb lamp, has to be dismantled or
whenever the protective container or cloth has to be removed from the xenon bulb lamp, authorized protective
clothing MUST be worn!
WARNING: Always wear face protection (full face shield with neck protector) when handling xenon bulb
lamps.
WARNING: Always wear protective clothing (welder’s jacket) when handling xenon bulb lamps.
WARNING: Always wear clean leather gloves with wrist protectors when handling xenon bulb lamps.
Necessary tools
• 5 mm Allen wrench.
• 17 mm open ended spanner (2 pieces).
How to remove the xenon lamp bulb from the lamp house?
1. Ensure that you wear protective clothing, a full face shield and protective gloves.
2. Remove first the lamps house side cover an d then the lamp ho use UV blocker a ssembly by releasing the retaining thumbscrews
as illustrated. Su pport the xenon bulb lamp while remov ing the UV blocker assembly.
12
Image 6-5
R59770091 DP-1500 06/01/2009 49