Filter
Top Products
5. Lenses & lens holder
5.5 Lens installation
How to install a lens into the projector lens holder ?
1. Remove the foam rubber in the opening of the lens holder if not rem oved yet.
2. Take the lens assembly out of its packing m aterial and remove the lens caps on both sides.
3. Place the lens holder in the “unlocked” pos ition by moving t he lens lock handle (A) towards the lens power sup ply sock et (B ) as
illustrated.
B
A
Image 5-6
4. Ensure that the lens holder stands in the On-Axis pos ition (horizontal and vertical mid pos ition).
Note: The lens holder is placed default in the On-Axis position at factory.
5. Gently inse rt the lens in such a w ay that the lens connector matches the socket (B).
Image 5-7
6. Insert the lens until the connector seats into the s ocket.
Warning: Do not release the lens yet, as the lens may fall out of the lens holder.
7. Secure the lens in the lens holder
by sliding the lens lock handle into the “locked” position, which is away from the lens pow er
supply socket. E nsure the lens touches the front plate of the lens holder.
38
R59770091 DP-1500 06/01/2009