Filter
Top Products
13. Removal and installation of projector covers
13. REMOVAL AND INSTALLATION OF PROJECTOR
COVERS
About this chapter
Most maintenance and servicing procedures demand rem oving one or more of the projector covers to gain access to the parts to
maintain or to service. To avoid redundancy, all procedures about cover removing or installing are group ed together in this chapter.
The maintenance and servicing proc edures also refer to this chapter if required. The procedur
es in this chapter describe, with
detailed step by step actions and illustrations, how to remove or install the projector covers. Note that some covers m ay only be
removed by qualified service personnel, see remarks above each procedure.
WARNING: Always switch off the projector and unplug the power cord before removing one of the covers,
unless otherwise stated.
Overview
• Removal of the lamp cover
• Removal of the input cover
• Removal of the front cover
• Removal of the side cover
• Removal of the rear cover
• Removal of the top cover
• Open the sealed compartment
• Close the sealed compartment
• Installation of the top cover
• Installation of the rear cover
• Installation of the side cover
• Installation of the front cover
• Installation of the input cover
• Installation of the lamp cover
R59770091 DP-1500 06/01/2009
123