Filter
Top Products
13. Removal and installation of projector covers
13.12 Installation of the front cover
The input cover and the lens may not be installed yet.
Necessary tools
7mmflat screw driver.
How to install the front cover of the projector?
1. Check if the front filter is present.
2. Ensure that no lens is mounted and that the input cover is not installed.
3. Install the front cover of the pr ojector doing the following:
a) first hook in the side of t he front cover at the front filter,
b) then gently push the other side of the front cover into position,
c) ensure that the locking studs in the corners c lick into their receivers.
B
C
A
Image 13-24
4. Secure the front cover by locking the captive screw in the middle at the b ottom of the front cover.
Image 13-25
5. Reinstall the rubber dust ring around the lens holder. See detail at the right of image 13-25.
R59770091 DP-1500 06/01/2009
135