Filter
Top Products
ESG Family Signal Generators Assembly Replacement
A2 Display
Service Guide 5-7
• On the A14 CPU/motherboard, set switch #4 on switch pack S201 to the correct
position for your display: (See Figure 5-3.)
If P104, P105, and P106 are set to the + position, set switch #4 of S201 to the up
(open) position, away from the CPU/motherboard.
If P104, P105, and P106 are set to the − position, set switch #4 of S201 to the down
(closed) position, toward the CPU/motherboard.
NOTE Switch #5 of S201 is set to the up (open) position in all circumstances.
NOTE You must reset the signal generator for the switch settings to take effect.
Figure 5-2 A2 Display (1 of 2)