Filter
Top Products
ESG Family Signal Generators Initial Troubleshooting and RF Block Diagrams
Signal Generator Options
Service Guide 1-5
Option Description
100 Option 100 has two implementations:
Multichannel W-CDMA (Revision 1.0-1.2) Personality - This first
implementation of Option 100 simulates multichannel forward and
reverse link signals according to the developing W-CDMA international
standards. Spreading and frame structure of these signals are
implemented according to March 1999 ARIB 1.0 - 1.2 specification.
Multichannel W-CDMA (3GPP 3.1 12-99) Personality - This second
implementation of Option 100 simulates multichannel downlink and
uplink signals according to the developing W-CDMA international
standards. This option implements a chip rate of 3.84 Mcps, and is based
on the December 1999 3GPP 3.1 specification.
101 Multichannel CDMA2000 Personality - This option simulates
multichannel forward and reverse link signals according to the developing
CDMA2000 standard revision 8.
1CM Rack Mount Flanges without Handles - This option adds two flanges and
the necessary hardware to rack mount the signal generator in a System II
or System II Plus cabinet.
1CN Front Handles - This option adds two front handles with the necessary
hardware to attach the handles to the front of the signal generator.
1CP Rack Mount Flanges with Handles - This option adds two front handles,
two flanges, and the necessary hardware to rack mount the signal
generator in an System II or System II Plus cabinet.
1E5 High Stability Timebase - This option replaces the standard timebase
reference assembly with a high-stability timebase reference assembly that
has improved specifications over the standard assembly, including
warranted specifications for aging rate. This feature is standard on
ESG-AP and ESG-DP Series Signal Generators.
1E6 High Performance Pulse Input - This option provides high performance
pulse capabilities with rise and fall times < 10 ns and on/off ratios > 70 dB.
1EM Move All Front Panel Connectors to Rear Panel - This option moves all of
the front panel connectors to the rear panel. If you order Option 1EM in
combination with any option that adds front panel connectors,
Option 1EM will cause all of the front panel connectors to be moved to the
rear panel and, in addition, some of the connectors will be changed from
BNC to SMB connectors.