Filter
Top Products
Advanced UseTANDBERG Director Videoconferencing System
71
Address
The IP-address of the PC with the VNC
software installed. To find the IP-address of
the PC, select ‘Command Prompt’ from the
Windows Start menu. Type ‘ipconfig’ and
press ENTER.
Display Number
The display number for VNC is 0 and
upwards. If you are using WinVNC, double-
click on the icon on the toolbar to view
‘WinVNC properties’. This number should
correspond with ‘Display Number’ in this
menu.
Password
VNC Settings
Enter the same password as specified in WinVNC properties. The password will be shown as
asterisk signs (*) the next time you enter the menu.
Start using VNC
To activate VNC, press PC on the remote control. Please make sure that ‘PC’ is set to ‘VNC’ in the
‘Video Settings Menu’. See also ‘PC SOFTPRESENTER’ section for further information.
NOTE
VNC SERVER SOFTWARE SETUP
• BOTH THE PC AND THE VIDEOCONFERENCING
SYSTEM MUST BE CONNECTED TO THE SAME LAN.
• A VNC SERVER MUST BE INSTALLED ON THE PC.
FREE SOFTWARE CAN BE DOWNLOADED FROM
HTTP://WWW.UK.RESEARCH.ATT.COM/VNC
• INSTALL THE SOFTWARE BY RUNNING THE
DOWNLOADED FILE.
• TO CONFIGURE THE VNC SERVER SOFTWARE:
- SELECT “ACCEPT SOCKET CONNECTIONS”.
- SELECT “AUTO” FOR “DISPLAY NUMBER”.
‘DISPLAY NUMBER’ IN THE SYSTEM MUST THEN
HAVE THE VALUE 0.
- ENTER A PASSWORD IN THE “PASSWORD”-FIELD.
MUST CORRESPOND WITH THE ‘VNC SETTINGS’
ON YOUR SYSTEM.