Filter
Top Products
Display OperationTANDBERG Videoconferencing System
51
Far End Camera Control
When in a videoconferencing call, it is possible to assume camera control for the far end site’s
system. When the local camera controls are selected press the FAR END CONTROL button. If the far
end site is configured for far end camera control, the camera control and source selection will
change to red indicating that FAR END CONTROL is selected.
The available far end sources will also be displayed and can be controlled if the far end complies.
If the far end does not comply, or has this feature disabled, there will be a ‘Not Available’
indication displayed under the controls. To return to control of local cameras, press button NEAR END
CONTROL
.