Advanced UseTANDBERG Director Videoconferencing System
69
Document Camera
Users of a document camera with an S-video output can configure the system to activate an S-
video input when pressing DOC CAM on the remote control.
VIDEO2 Video Input 2 (S-video) will be activated when pressing DOC CAM on the remote
control.
VIDEO3 Video Input 3 (Composite) will be activated when pressing DOC CAM on the
remote control.
PC
Configure what should be activated when pressing PC.
VGA Pressing PC will activate the VGA input on the system (default).
VNC Pressing PC will use VNC to show images from your PC (see ‘VNC Settings’ for
further information).
Focus
To manually adjust the focus select ‘Manual’ and use the ARROW KEYS to adjust.
Brightness
To manually adjust the brightness select ‘Manual’ and use the ARROW KEYS to adjust.
Whitebalance
In ‘Auto’ mode the whitebalance is continuously updated. To update the whitebalance manually,
select ‘Manual’ and press OK.
TIP
A WHITE OBJECT SHOULD BE HELD
IN
FRONT OF THE CAMERA A FEW
SECONDS
BEFORE AND AFTER
SELECTING
MANUAL
WHITEBALANCE.