Filter
Top Products
Getting Started TANDBERG Director Videoconferencing System
30
Getting Started
System startup
If the TANDBERG Director System is not already
powered on, press the POWER BUTTON on the
SMART Board
TM
3000i front control panel unit to
activate the projector display. It will then require
approximately 40 seconds to complete the startup
routine, at which point the TANDBERG startup
screen will be displayed.
Control Orientation
Touch either the LEFT or RIGHT hand side of the start screen depending on your control
preference. When using a mouse to control the system right-click on the preferred side.
Selecting the left hand side will display the source selection and device control on that
left side of the screen. The taskbar controls will be configured from the left side.
Selecting the right hand side will display the source selection and device control on that
right side of the screen. The taskbar controls will be configured from the right side.
The control preference feature has been incorporated primarily for when the Director Applications
Module has been integrated within the SMART Board™ hardware. This allows the user to
manipulate the controls without standing in front of the main display or camera.
Local Video
TANDBERG
Local Video
TANDBERG