TANDBERG D5016402 CD Player User Manual


 
IntroductionTANDBERG Director Videoconferencing System
11
Document Camera**
A composite video source is available for a document camera. Document cameras can be used to
show a wide variety of media, such as whitepapers, film negatives, or standard overhead projector
transparencies. Source selection, zoom, focus and lighting can all be controlled from the button
panel of the document camera.
VCR/DVD player**
Standard composite video VCR’s or DVD players can be added for playback and recording. Using
codec features such as audio “ducking” (lowering the VCR output while the presenter is talking)
allows seamless presentations and participant interaction. Use the front panel controls or the
supplied remote control specific to these devices.
Auxiliary Sources**
Any auxiliary source can be substituted for the sources above.
There are a total of 2 s-video and 2 composite inputs available on the system.
Optional Equipment**
Additional Monitors
An additional monitor can be added for viewing the far or local video. Typically used to view the far
side in a teaching environment, the monitor will also show the local image when giving a local
presentation.
PC and Laptop Computer
A user supplied PC and/or laptop can be connected to the system to enhance presentation.
You may choose to connect a PC placed inside the 3000i cabinet and use it as a source for
presentation. If you intend to use a PC as a presentation source only, then the PC must be, at
minimum, able to support VGA.
You may choose to connect a laptop computer to the 3000i as a source for presentation. This can
be done in conjunction with, or independently from, the PC that is integrated to the Director
system.
Refer to the REAR PROJECTION SMART BOARD
TM
3000I INSTALLATION GUIDE for information on
connecting the PC and laptop as well as SMART software installation and configuration.
** - OPTIONAL EQUIPMENT AVAILABLE THROUGH TANDBERG OR IS USER SUPPLIED.