TANDBERG Director Videoconferencing System
4
Important Information
Please review this manual and the REAR PROJECTION SMART BOARD
TM
3000i INSTALLATION GUIDE
carefully before setting up and using the Director videoconferencing system. With proper care, your
system should provide years of trouble-free service.
Other Warnings and Safety Precautions
For operating safety and to avoid damage to the unit, follow these instructions.
• Move the cabinet with care. Quick stops, excessive force and uneven surfaces can overturn
the cabinet.
• When you transport the Director, only ship the cabinet in the upright position and never lay the
interactive whiteboard face down. In addition, ensure that the projector is secure by tightening
the projector adjustment knob, locking bolt and two shipping straps.
• If you transport the Director over a distance, we strongly urge you to completely repackage it
using the original packaging. This packaging for the Director was designed with optimal shock
and vibration protection. If the original packaging is no longer available, pack all components
with as much padding as reasonably possible to ensure that they are not exposed to
excessive vibration or shock.
• If cabinet assembly is required, we strongly recommend that at least two people perform this
task.
• Do not touch the rear surface of the interactive whiteboard or apply isopropyl alcohol, water or
acetone. If any of these fluids come into contact with this surface, the diffusion coating on the
rear of the interactive whiteboard will be damaged, resulting in a permanent deterioration in
display quality.
WARNING: THE PROJECTOR INSIDE THE CABINET IS A HIGH-BRIGHTNESS LIGHT SOURCE. DO
NOT
STARE INTO THE BEAM OF LIGHT OR VIEW IT DIRECTLY. PREVENT CHILDREN FROM STARING
DIRECTLY INTO THE BEAM OF LIGHT.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT
TO RAIN OR MOISTURE.
WARNING FOR EUROPEAN CUSTOMERS:
THE 3000i SHOULD ONLY BE USED WITH EUROPEAN TN AND TT POWER DISTRIBUTION SYSTEMS.
THE 3000I IS NOT SUITABLE FOR OLDER, IT-TYPE POWER DISTRIBUTION SYSTEMS FOUND IN SOME
EUROPEAN COUNTRIES. “THIS SYSTEM (IT-TYPE) IS WIDELY USED ISOLATED FROM EARTH, IN
SOME
INSTALLATIONS IN FRANCE, WITH IMPEDANCE TO EARTH, AT 230/400V, AND IN NORWAY,
WITH VOLTAGE LIMITER, NEUTRAL NOT DISTRIBUTED, AT 230V LINE-TO-LINE.” (IEC 60950:1999).
CONTACT QUALIFIED PERSONNEL IF YOU’RE UNCERTAIN OF THE TYPE OF POWER SYSTEM
AVAILABLE WHERE YOU’RE INSTALLING YOUR 3000I.