Filter
Top Products
Getting StartedTANDBERG Director Videoconferencing System
35
Network and LAN Settings
ISDN configuration
For each installation of the system it is necessary to configure the unit. All configuration parameters
are available via the menu system. If you are using an external IMUX or special networks, the
external equipment may also need to be configured.
• Press MENU on the IR control. Select the menu ‘TERMINAL SETTINGS’ > ‘NETWORK’.
• Set ‘Current Network’ to the network you want to use.
• Specify the settings for the selected network in one of the menus.
For details, follow the instructions in ‘TERMINAL SETTINGS’ > ‘NETWORK CONFIGURATION’ in this
manual.
For further information refer to the examples in:
APPENDIX 1: CONNECTING THE SYSTEM TO ISDN USING NT1 NETWORK ADAPTERS
APPENDIX 2: CONNECTING THE SYSTEM TO THE SWITCHED 56 NETWORK
LAN configuration
• Press MENU on the remote control. Select the menu ‘Terminal Settings’ > ‘LAN Settings’.
• Specify the necessary LAN settings according to the instructions from your LAN
administrator. If there is an H.323 Gatekeeper present on your LAN, see also ‘H.323
Settings’.
For details, follow the instructions in chapter ‘LAN SETTINGS’ in this manual.