Filter
Top Products
Advanced Use TANDBERG Director Videoconferencing System
70
Video Name
* E1 ONLY
VGA Out
To enhance the local video quality, a VGA monitor may be connected.
MAIN Should be used if you want to use a VGA monitor as your main monitor. Video
outputs 1 & 3 will be disabled.
DUAL Should be used if you want to use a VGA monitor as your dual monitor. Video
outputs 2 & 4 will be disabled.
LOOP Should be used if you want to use a TV monitor as your main monitor.
VGA Out Quality
VGA Out Quality changes the resolution of the VGA signal available on the ‘VGA Out’ connector at
the rear of the codec.
AUTO Will sense the resolution on the ‘VGA input’ port and use the same resolution on
the ‘VGA Out’ port.
VGA Will force ‘VGA out’ to VGA (640X480).
SVGA Will force ‘VGA out’ to SVGA (800X600).
XGA* Will force ‘VGA out’ to XGA (1024X768).
Each video input defaults to the same name used on the remote control to select a video input.
To edit the name, use the number keys on the remote control to select letters. Press DELETE to
erase a letter.
VGA Settings
NOTE
iCIF WILL NOT BE AVAILABLE
WHEN
VGA OUT IS MAIN OR
DUAL.
NOTE
IF YOU SET ‘VGA OUT’ TO
‘MAIN’, MAKE SURE YOU HAVE A
VGA-MONITOR CONNECTED TO
THE
VGA-OUTPUT ON THE
SYSTEM
. IF YOU DO NOT HAVE A
VGA-MONITOR CONNECTED,
YOU WILL NOT BE ABLE TO SEE
THE MENU SYSTEM!