Filter
Top Products
Advanced Use TANDBERG Director Videoconferencing System
58
DuoVideo / Snapshot Source
Select which video source DuoVideo
TF
transmits.
If you want the document camera to be the default source when using DuoVideo
TF
/ snapshot,
select ‘DuoVideo / Snapshot Source: DocCam’.
To use the same video source as on the first connection for DuoVideo
TF
/ snapshot, select ‘Duo
Video / Snapshot Source: Current’.
Auto-Display Snapshot
Select On to automatically display a received snapshot. If this selection is Off, you will have to
press SELFVIEW to display a snapshot.
Snapshot Filter
Select On to remove any instability in the high quality snapshot.
Utilities
Autoanswer
ON The system will automatically answer all incoming calls.
ON+MICOFF The system will automatically answer all incoming calls and switch the
microphone off when the call is connected. Press MIC OFF to switch the
microphone on.
OFF You must manually answer all incoming calls by pressing the CONNECT key.
Far end camera control
ON The far end will be able to:
- Control your camera
- Select your video sources
- Activate your presets
- Request snapshots
OFF None of the four features above on the local system can be accessed by the far
end, however you will still be able to control the camera on the far end.
TF - TANDBERG FIRST