TANDBERG D5016402 CD Player User Manual


 
Display Operation TANDBERG Videoconferencing System
44
Taskbar
The grey TANDBERG TASKBAR present at the bottom of the
screen provides controls relevant to local presentation
operation. The buttons will change according to the display
status. The button border and text will illuminate red when it is
activated.
Video Display Window
Shows the currently selected VIDEO SOURCE.
It is possible to enlarge certain video display windows by touching the video window itself.
The PC source is configured for on-screen annotation, therefore the ENLARGE/REDUCE buttons
must be used in this case.
Touching the window again will return it to the previous size.
NOTE
TASKBAR REFERENCES ARE FOR
THE
TANDBERG INTERFACE AND
NOT
PC OPERATING SYSTEM
TASKBARS
(I.E. MICROSOFT
WINDOWS, MACINTOSH)
HIDE removes the taskbar from the screen, a single Taskbar button replaces it.
TASKBAR displays the taskbar on the bottom of the screen
EXIT from the local display operation to the Opening screen.
ENLARGE increases the size of the video display to full screen, thus covering the source
selection and device controls. The taskbar will remain available.
REDUCE returns the video display to the standard size allowing access to the source
selection and device control.
It is also possible to enlarge and reduce the video display by touching the video
window itself. This function works for all video sources except the PC source
Select this function to access the VIDEOCONFERENCE CALL CONTROLS and initiate a call.
Increases or decreases the local volume level within the room by using the plus or
minus buttons. The level bar indicates the current level setting.
HIDE / TASKBAR
EXIT
ENLARGE / REDUCE
VIDEOCONFERENCE
VOLUME