Filter
Top Products
Installation TANDBERG Director Videoconferencing System
16
Installing the Guest Laptop Shelf
1. Locate the two laptop shelf keyholes and the single thumbscrew hole on the upper right (or
left) side of the cabinet. Remove the plastic hole covers.
2. Push the two protruding bolts on the edge of the shelf into the two keyholes, and then push
the shelf firmly down.
3. Push the captive thumbscrew at the bottom of the shelf into the thumbscrew hole and
tighten.
TIP
YOU CAN INSTALL THE SHELF ON
EITHER
SIDE OF THE CABINET. IF
YOU
’RE INSTALLING THE SHELF ON
THE
COMPUTER SIDE OF THE
CABINET
, INSTALL THE SHELF
BEFORE
THE COMPUTER. THE
PLASTIC
HOLE COVERS ARE MUCH
EASIER
TO REMOVE WHEN THE
COMPUTER IS NOT INSIDE.
2 keholes
guest laptop shelf
thumbscrew hole