Filter
Top Products
Operation
Runco SC-30d/SC-35d Installation/Operation Manual 81
PRE
L
IMINAR
Y
The Auto Color Enable and Test Pattern Enable checkboxes let you choose what to
display on-screen while making these adjustments. These controls work together as
follows:
• YCM (Yellow, Cyan, Magenta): To precisely adjust the secondary color points
associated with the custom color gamut, choose YCM from the PCE sub-menu. Each
control operates only on the color specified. Surrounding colors are linearly interpolated
based on their distance from each of these colors.
•Lamp: Select Lamp from the Display Color - Projector Settings menu to adjust the
projector lamp brightness.
• Power (230W or 260W): To supply a constant wattage to the lamp, select Power
(230W or 260W) from the Lamp menu to set the lamp power level. You can choose
to run the lamp as bright as possible (this is the default setting) or you can choose a
lower setting. Generally, lower lamp output prolongs the life of a lamp, but
decreases brightness.
Auto Color Enable
Setting
Test Pattern Enable
Setting
Description
Off Off When both boxes are unchecked, the input
signal (normal picture) appears on the
display.
Off On When only the Test Pattern Enable box is
checked, a white “curtain” test pattern
appears instead of the input signal.
On Off When only the Auto Color Enable box is
checked, the input signal appears on the
display.
When you select a red, green, blue, yellow,
cyan or magenta color point to adjust, the
Dimension Digital Controller displays only
that color channel. When you select a white
point x- or y-value, all colors are visible
(normal picture).
On On When both boxes are checked, the
Dimension Digital Controller automatically
displays a red, green, blue, yellow, cyan,
magenta or white “curtain” test pattern
when you select an x- or y-value for that
color point to adjust.
Display Color
YCM
Yellow x 0.419
Yellow y 0.505
Cyan x 0.225
Cyan y 0.329
Magenta x 0.321
Magenta y 0.154
7 Auto Color Enable
7 Test Pattern Enable