Filter
Top Products
Installation
Runco SC-30d/SC-35d Installation/Operation Manual 35
PRE
L
IMINAR
Y
3.7
Mounting the
Dimension Digital
Controller
The Dimension Digital Controller unit can be placed on any flat, stable surface such as a
shelf or table, or it can be rack-mounted using the supplied mounting hardware. Place it in
a location that provides easy access to the power connectors.
The Dimension Digital Controller unit requires 2U (3.5 inches) or more of vertical rack
space.
To mount the Dimension Digital Controller in a standard, 19-inch equipment rack, install
the mounting ears on either side of the chassis using the supplied screws; see Figure
3-11. Then, secure the mounting ears to the rack.
Figure 3-11. Attaching the Rack Mounting Hardware