Filter
Top Products
Specifications
Runco SC-30d/SC-35d Installation/Operation Manual 129
PRE
L
IMINAR
Y
7.1
SC-30d/SC-35d
Projector
Specifications
Table 7-1 lists the SC-30d/SC-35d projector specifications.
7. Specifications
Table 7-1. SC-30d/SC-35d Projector Specifications
Projector Type: 3-chip Texas Instruments Digital Light Processing™ (DLP),
SuperOnyx™ DMD™, 3D capable
Processing: Runco Dimension Digital Controller with ViVix IV™ technology
and BRiC (Backup, Recovery and Clone) tool
Native Resolution: Full HD 1920 x 1080 (1080p)
Aspect Ratios: 4:3, Letterbox, 16:9, VirtualWide, Cinema, Virtual Cinema,
Native, Auto Cinema
Video Standards: Refer to Table 7-2
Video Compatibility: Refer to Table 7-3
Picture Size (16:9 Screen): SC-30d
Recommended Width: 77 - 111 in.
Maximum Width: 169 in.
SC-35d
Recommended Width: 103 - 148 in.
Maximum Width: 227 in.
Throw Distance
(Factor x Screen Width):
Refer to Table 3-3
Horizontal & Vertical Offset: Refer to Table 3-4
Illumination System: 230W / 260W (selectable) HPM lamp
Estimated Lamp Life: 2000 hours, typical (260W power setting)
3000 hours, typical (230W power setting)
Inputs and Outputs: • Digital Video x 2 (from Dimension Digital Controller)
• RS-232 (female DB9) for serial communications
• 3D Sync Out (female 3-pin, VESA standard mini-DIN) to IR
Emitter
Power Requirements: 100 to 240 VAC (auto-sensing), 50/60 Hz, 400 Watts
(1365.2 BTUs/hour) maximum
Operating Temperature: 10°C to 40°C, up to 7,500’ altitude
10°C to 35°C, 7,500’ to 10,000’ altitude
Operating Humidity: 0 - 85% humidity (non-condensing)
Regulatory Approvals: FCC Part 15 Class B, CE Class B, UL, cUL, CB, RoHS,
WEEE, local conformances as required