Filter
Top Products
Specifications
132 Runco SC-30d/SC-35d Installation/Operation Manual
P
RELI
M
INARY
7.2
Dimension Digital
Controller
Specifications
Table 7-2 lists the Dimension Digital Controller specifications.
Table 7-2. Dimension Digital Controller Specifications
Aspect Ratios: 4:3, Letterbox, 16:9, VirtualWide, Cinema, Virtual Cinema,
Native, Auto Cinema
Video Standards: • DisplayPort with HDCP
• HDMI and DVI with HDCP for digital video
• Component and RGB HDTV (1080p, 1080i, 720p)
• Component and RGB EDTV (576p, 480p)
• Component and Composite SDTV (576i, 480i)
• RGB SCART with adaptor
• NTSC (M, 4.43)
• PAL (B, G, H, I, N, M)
•SECAM (M)
•CEA-861D
•HDMI 3D
Inputs: (1) DisplayPort 1.1a
(8) HDMI with 3D Support, CEC and Deep Color
(1) Component/SCART (3 x RCA)
(2) Component/RGBHV (15-pin VGA)
(3) Composite
Outputs: (2) HDMI with 3D Support and Deep Color to SC-30d/SC-35d
(1) HDMI with Deep Color to second display or audio
processor
Control Options: • Front panel vacuum fluorescent display and keypad
• Discrete infrared (IR) remote
• RS-232 (female DB9) for serial commands
• USB (type B female) for firmware upgrade
• RS-232 (male DB9) for accessories
• 3.5-mm wired IR input for Niles/Xantech-compatible IR
systems
• Consumer Electronics Control (CEC) protocol support via
HDMI
•Ethernet
Ethernet Communication: RJ45 (female) for web server, e-mail, auto firmware upgrade
and Telnet
RS-232 Communication
Parameters:
19200 bps, no parity, 8 data bits, 1 stop bit, no flow control
Trigger Outputs: (3) +12 VDC, each rated at 250 mA and thermal
fuse-protected
Accessory Applications: Runco Firmware Upgrader, Runco BRiC (backup, restore,
clone), CalMAN by SpectraCal for automatic calibration
Power Requirements: 100-240V~, 47-63Hz, 0.85 Amps
Operating Environment: 41°F to 104°F (5°C to 40°C), 0% to 90% humidity
(non-condensing); up to 10,000 feet (3,048 meters) altitude