Filter
Top Products
System Overview
Runco SC-30d/SC-35d Installation/Operation Manual 5
PRE
L
IMINAR
Y
A SC-30d/SC-35d Active 3D Projection System consists of the following components:
• The projector (equipped with dual digital video inputs) with optional anamorphic lens
and lens transport assembly.
• The DC-300 Dimension Digital Controller™ unit that provides “left-eye” and “right-eye“
video signals and the on-screen display (OSD) menu to the projector. In addition, the
Dimension Digital Controller controls the projector in response to user input via its
infrared (IR) remote control unit or front-panel keypad, an external control system or
HDMI Consumer Electronics Control (CEC) messages.
• An Active 3D Emitter that receives a left/right synchronization signal from the Dimension
Digital Controller and transmits it to the Active 3D Glasses worn by the viewers. This
signal precisely controls when left and right fields are visible through the glasses.
Figure 2-1 shows how these components connect to and interact with each other. The
following sections describe each one in detail.
Figure 2-1. SC-30d/SC-35d Active 3D Projection System Block Diagram
2. System Overview
Trigger
Remote
Control
IR
Projector
Optical Engine
Video
Sources
Active 3D
Emitter
Active 3D
Glasses
Primary Video/CEC (Control)
HDMI, DisplayPort,
Component, SCART,
RGB, Composite
DC-300
Dimension Digital Controller
Primary Video
(Left)
RS-232
Secondary Video
(Right)
L/R Stereo Sync
HDMI Audio Out
Secondary Video
Anamorphic
Lens
RF
2D/3D Video
Decoder/
Multiplexer
Secondary
Video
Scaler
Primary
Video
Scaler