Filter
Top Products
Operation
78 Runco SC-30d/SC-35d Installation/Operation Manual
PRE
L
IMINAR
Y
• Color Temp: Select Color Temp from the Display Color - Common Settings menu to
adjust the color temperature. Color temperature establishes the “color of gray” by
adjusting the 75% white point to various color points.
What are “color points?” A “color point” is an x/y coordinate pair that defines a
color’s location on the standard CIE chromaticity graph, shown in Figure 4-7. (CIE
stands for “Commission Internationale de l’Éclairage” (International Commission on
Illumination), the organization responsible for color measurement and management
standards.)
Figure 4-7. CIE 1931 Chromaticity Diagram
• Simple: Select Simple mode from the Color Temp menu (with the SC-30d/SC-35d,
this is the only choice) to choose one of five color temperature presets: 3200K,
5500K, 6500K, 7500K and 9300K. The default setting, 6500K, is appropriate for
most situations. Higher settings produce a “bluer” picture; lower ones impart a
reddish hue to the image.
0.00.10.20.30.40.50.60.70.80.91.0
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
x
y
2000
2222
2500
2857
3333
4000
5000
5714
6667
8000
10000
D50
D65
D93
Red
Blue
Green
Cyan
Magenta
Yellow