Filter
Top Products
External Control
128 Runco SC-30d/SC-35d Installation/Operation Manual
PRE
L
IMINAR
Y
Set Menu Language 0x32
– √
Give Physical Address 0x83
– √
Set Stream Path 0x86
– √
Get CEC Version 0x9F
– √
Abort Message 0xFF
– √
User Control Pressed 0x44
– √
User Control Released 0x45
– √
Give OSD Name 0x46
– √
Menu Request 0x8D
– √
Give Device Power Status 0x8F
– √
The Dimension Digital Controller does not transmit HDMI CEC
control messages from the “HDMI Audio Out” connector.
Table 6-4. CEC Commands Supported by the Dimension Digital Controller
(continued)
Opcode Value
Supported? (√ = Yes, – = No)
Initiator Follower
Note