Filter
Top Products
Installation
Runco SC-30d/SC-35d Installation/Operation Manual 55
PRE
L
IMINAR
Y
3.13
Installing and
Adjusting the
CineWide Anamorphic
Lens
If you are installing an SC-30d/SC-35d/CineWide or SC-30d/SC-35d/CineWide with
AutoScope, proceed as follows to install and adjust the secondary anamorphic lens.
Cylindrical Anamorphic
Lens Installation and
Adjustment
The Cylindrical Anamorphic lens mount kit consists of everything shown in Figure 3-29.
Some components shipped with your projector may differ slightly from what is shown in
these instructions. If any items are missing or damaged, please contact your Runco dealer
or Runco Customer Service at (800) 23-RUNCO.
Figure 3-29. Cylindrical Anamorphic Lens Mounting Assembly - Exploded View
It is extremely important that the primary lens is properly
adjusted before you install the anamorphic lens. Ensure that
the image from the primary lens is perfectly centered on the
screen.
Note
2
3
5
9
7
8
6
1
Pitch Adjustment Yoke
for Lens
Anamorphic Lens
Set Screw
4
Height/Y-Adjustment
T-Screw and Washer
(2x)
Pitch Adjustment
T-Screw and Washer
(2x)
Anamorphic Lens
Holder
1/4-20
Hex Bolt (2x)
and Washer
(2x)
AutoScope
Carriage Plate (or
Fixed CineWide
Base Plate)
Yaw/X Adjustment
Lever and
Washer(2x)
Pitch Adjustment
T-Nut (2x)