Filter
Top Products
Operation
Runco SC-30d/SC-35d Installation/Operation Manual 85
PRE
L
IMINAR
Y
• Splash Enable: When you have finished customizing the splash screen, select Splash
Enable from the Splash Configure menu. Then, select On and press ENTER.
OSD Position: To adjust the position of the OSD, select OSD Position from the
Calibration menu and press ENTER.
Press or to select “Hor.” or “Ver.” Then, press or to change the position.
ServiceUse the Service menu to access advanced projector configuration settings. This menu
should be used by ISF-certified technicians only.
Test Video: Select Test Video from the Service Menu to access the internal test patterns
on the Dimension Digital Controller. Table 4-4 lists the available test patterns and
describes their suggested usage.
Service
Test Video
Input Names
Remote Control
Display Device
Network
Color Space
Triggers
Miscellaneous
HDMI
Front Panel Brightness
Auto Power Off
Standby Mode
System Reset
You must enter a passcode to access the Service menu.
Table 4-4. Test Patterns and Their Suggested Usage
Pattern Suggested Usage
Color Bars 1
Use this pattern when making
color saturation and tint
adjustments.
Color Bars 2
Use this pattern when making
color saturation and tint
adjustments.
Focus
Use this pattern when adjusting
the focus.
Note