Filter
Top Products
Installation
30 Runco SC-30d/SC-35d Installation/Operation Manual
PRE
L
IMINAR
Y
3.5
Installing the Optional
CineWide Lens Mount
If you are installing a standard SC-30d/SC-35d (without an anamorphic lens), skip this
step and proceed with Mounting the SC-30d/SC-35d (page 34).
If you are installing an SC-30d/SC-35d/CineWide, proceed with Installing the Fixed
CineWide Base Plate (page 33).
If you are installing a SC-30d/SC-35d/CineWide with AutoScope, proceed as follows to
install the AutoScope lens motor.
Installing the AutoScope
Lens Motor
(SC-30d/SC-35d/
CineWide with AutoScope)
Figure 3-6 shows the SC-30d/SC-35d/CineWide with AutoScope motor assembly.
Figure 3-6. SC-30d/SC-35d/CineWide with AutoScope Motor Assembly –
Exploded View
1. Do not install the CineWide lens yet, only the fixed CineWide
base plate or AutoScope lens motor. You will install the
CineWide lens after you install the projector and adjust the
primary lens.
2. Some components shipped with your projector may differ slightly
from what is shown in these instructions.
Note
➤
3
1
AutoScope
Lens Motor
Screw, Phillips Pan-Head,
10-32 x 3/8” (12x)
2
CineWide with AutoScope
Ceiling Mount Adapter/
Projector Stand, Right
4
CineWide with
AutoScope Ceiling
Mount Adapter/
Projector Stand, Left