Filter
Top Products
System Overview
Runco SC-30d/SC-35d Installation/Operation Manual 15
PRE
L
IMINAR
Y
5. Numeric Buttons (Standard)
Use these buttons to enter numeric characters (0 ... 9), such as when changing
remote control codes (refer to Remote Control on page 87).
Numeric Buttons (Extended)
In extended mode, press a numbered button to select a video source, as follows:
6. SCREEN 1 (Standard) / Video 3 Input (Extended)
SCREEN 2
Use these buttons to select a screen profile. For more information, refer to Screen on
page 66.
In extended mode, press SCREEN 1 to select the Video 3 (Composite 3) input.
7. Memory Preset Buttons:
ISF NIGHT (Standard) / SCART (Extended)
Press to recall settings for the current input from the “ISF Night” memory preset. In
extended mode, press to select the SCART input.
ISF DAY (Standard) / Video 2 (Extended)
Press to recall settings for the current input from the “ISF Day” memory preset. In
extended mode, press to select the Video 2 (Composite 2) input.
CUST 1 (Standard) / 3D Mode = Off (Extended)
Press to recall settings for the current input from the “Custom 1” memory preset. In
extended mode, press to set the 3D Mode to Off (for 2D content).
CUST 2 (Standard) / Aspect Ratio = Auto Cinema (Extended)
Press to recall settings for the current input from the “Custom 2” memory preset. In
extended mode, press to set the Aspect Ratio to Auto Cinema.
8. EXIT
Press this button to exit the current menu and return to the previous one.
Remote Control Button Source Assignment in Extended Key Code Mode
1
HD 2
2
HDMI 1
3
HDMI 2
4
HDMI 3
5
HDMI 4
6
HDMI 5
7
HDMI 6
8
HDMI 7
9
HDMI 8
0
DisplayPort