Filter
Top Products
Operation
74 Runco SC-30d/SC-35d Installation/Operation Manual
PRE
L
IMINAR
Y
Memory Presets For each input, the Dimension Digital Controller lets you save image quality settings as
presets that you can recall at a later time. You can create up to four presets per input and
display mode (resolution and frame rate).
The Dimension Digital Controller stores the following display modes in each memory
preset:
•480i
•480p
•576i
•576p
• 720p/24 Hz
• 720p/25 Hz
• 720p/30 Hz
• 720p/50 Hz
• 720p/60 Hz
• 1080i/50 Hz
• 1080i/50 Hz (Australia)
• 1080i/60 Hz
• 1080p/24 Hz
• 1080p/25 Hz
• 1080p/30 Hz
• 1080p/50 Hz
• 1080p/60 Hz
Use the Memory Presets menu to recall saved image presets, or to save image settings in
the “Custom 1” or “Custom 2” memory location. The currently-selected preset is indicated
by a “Δ to its left; in the example shown here, ISF Night is selected.
You should save changes to any of the following settings to a preset; otherwise they will
be lost when a new input source or resolution is selected:
•Brightness
•Contrast
• Color saturation
•Tint
• Sharpness
•Gamma
•Lamp Settings
• Color temperature and white balance
To select a memory preset, press or to highlight it and press ENTER.
To save the settings for the current input and display mode to the Custom 1 or Custom 2
memory preset, select it, press or to highlight Save and press ENTER.
Memory Presets
Î
ISF Night
ISF Day
Custom 1 Save Reset
Custom 2 Save Reset
➤