Filter
Top Products
Key Features
Video Inputs
• Three HDMI and two universal analog video inputs — The two universal 15‑pin
HD inputs automatically detect incoming RGB, HD component video, YUVi, S‑video,
or composite video signals. The DVS 605 allows for seamless switching between
HDMI and analog video sources.
• Auto input format detection — For the universal analog video inputs, the DVS 605
detects the incoming signal format, automatically reconfiguring the scaler to provide
the appropriate decoding and signal processing.
• Auto-switching between inputs — The DVS 605 can automatically switch between
input sources. The unit can be set up to automatically switch to an active input, by
giving priority to the highest active input (51), or to the lowest active input (15).
This allows for simple, automated control of the DVS 605 when a control system is
not in use.
Auto Switch feature detects “active” video inputs by the presence of valid Horizontal
and Vertical sync inputs, and not by the presence of an input cable, or +5 VDC from
a source that is currently not outputting active video. Using simultaneous video input
detection on all inputs, the DVS 605 will switch to the active input depending on the
configured order of precedence (highlow vs. lowhigh).
With auto‑switching, the DVS 605 can accommodate additional inputs when
connected to the outputs of a larger presentation switcher, or can be used for
unmanaged switching, or as an upstream matrix switcher.
NOTE: When Auto Switch mode is active, PIP mode cannot be enabled. Similarly,
if PIP mode is currently active, Auto Switch mode cannot be enabled.
• True seamless switching — Seamless cut and dissolve transition effects are
available for inputs 1 to 4. Input 5 features glitch‑free switching with a fade through to
black.
Video Outputs
• 3G/HD-SDI output — Active only if the current resolution is set to 720p, 1080i,
1080p, or 2k 23.98/24/25 Hz. All video outputs (HDMI, VGA, SDI) share a common
output resolution and display the same content.
• Simultaneous scaled outputs for HDMI, HD-SDI, and analog RGB or HD
component video — HDMI and high resolution analog RGB or component video
outputs are available for driving two displays.
• Selectable output rates — Available output rates include computer video (640x480 )
up to 1920x1200, HDTV rates up to 1080p/60 Hz, and 2048x1080 (2k/60 Hz).
• Picture-in-picture (PIP) — For inputs 1 to 4, the DVS 605 provides unrestricted
two‑window display of standard definition and high resolution digital and analog video
sources. Multiple PIP presets are available, including side‑by‑side windows. The
main and PIP windows can be dynamically sized, positioned, and magnified. In audio
models, audio switching can be set to follow either the main or PIP window.
DVS 605 • Introduction 3