Filter
Top Products
Configuration Pages
NOTE: From Hardware pages, click on the Configuration tab .
The Configuration pages options are:
• Input/Output Configuration • EDID Minder • Image Settings • PIP Settings
• Audio Configuration • Preset Management • Device Settings.
Figure 32. Global Navigation Bar for the Configuration Page
The browser screen is set out as two sections. These are AV Controls on the left, and the
options page on the right.
AV Controls Panel
NOTE: This panel section can be hidden or revealed by
clicking on the section handle (see image at right).
The AV Controls panel is used to control AV settings such as
input selection and for performing a one‑time Auto‑Image on an input.
Video and audio mute can be turned on or off, and image freeze can be invoked.
Figure 33. AV Controls Panel
At the bottom of the panel is a summary of the current active input and output status,
which includes signal format and HDCP status.
Auto-Image button
Click on this button to start a one time Auto‑Image on the currently selected input.
AV input buttons (inputs 1-5)
Click on these to select an input as desired. As a new one is selected, the summary text
within the panel changes to reflect the new input and output status.
DVS 605 • Using the Default Web Pages 63