Filter
Top Products
Command ASCII (Telnet)
(host to processor)
URL Encoded (Web)
(host to processor)
Response
(processor to host)
Additional Description
Set IP address
24
E X10*CI} WX10*CI
|
Ipi•X10*] X10* = IP address (xxx.xxx.xxx.xxx).
Leading zeros in each of the four fields are
optional in setting values.
Read IP address
24
ECI}
WCI
|
X10*]
Leading zeros in each of the four fields are
suppressed in returned values.
Read hardware
address (MAC)
ECH}
WCH
|
X10(] X10( = hardware media access control (MAC)
address (xx-xx-xx-xx-xx-xx).
Set subnet mask
24
E X11)CS} WX11)CS
|
Ips•X11)] X11) is the subnet mask (xxx.xxx.xxx.xxx).
Syntax is the same as for the IP addresses.
Leading zeros are optional in setting values.
Read subnet mask
ECS} WCS
|
X11)]
Leading zeros are suppressed.
Set gateway IP address
24
E X10*CG} W X10*CG
|
Ipg•X10*] X10* is the IP address. Leading zeros are
optional.
Read gateway IP address
ECG} WCG
|
X10*]
NOTE: Changes made to any Ethernet settings do not take effect until the reboot networking command (2BOOT) is issued.
Reboot network
E2BOOT}
Boot2]
Restarts network connections after IP address
or DHCP changes.
NOTE: X10* = IP address (xxx.xxx.xxx.xxx); leading zeros in each of 4 fields are optional in setting values, and are suppressed in returned values
X10( = Hardware (MAC) address (xx-xx-xx-xx-xx)
X11) = Subnet mask (xxx.xxx.xxx.xxx). Leading zeros are optional in setting values in each of four fields, and are suppressed in returned values.
DVS 605 • SIS Communication and Control 58